Gerson Therapy

NORWALK JUICER AND PURE JUICER COMPARISON

NORWALK JUICER AND PURE JUICER COMPARISON

If you are in the market for a two-stage and cold-press juicer there are really only two options.

We get asked a lot how our PURE Juicer compares to the traditional Norwalk Juicer. While to the novice they may look the same, there are actually many significant differences between them. We like to focus on just a few key features that make a big difference. The PURE's:

  • Cutter and offset feed tube are better - no pre-chopping required.
  • Cold press operates makes more juice at it's higher pressure
  • Is easier to clean and wipe down is now $500 less than the Norwalk

We guarantee you get more juicer for your buck.


Left: Norwalk Juicer 290

Right: PURE Juicer

While both Mercedes and Chevrolet have four tires and a steering wheel they are not the same. PURE has taken two stage juicing to an all new level. 

The most obvious difference is the PURE Juicer’s modern gorgeous design with smooth rounded edges it is. countertop eye-candy in any kitchen small or big. Design is built in, not an afterthought, you'll be glad you picked the pretty one.

A core principle of good design is “form follows function”. Good design goes beyond appearance; so the difference truly is in the details.

Left: Norwalk Juicer 290

Right: PURE Juicer

The PURE Juicer’s patented twist and lock feed tube makes it very easy to take it apart for cleaning and it effortless clicks back together to make another juice. No wing nuts or screws – just an easy push of a button. Also no pre-chopping, just feed your produce straight into the PURE 8 tooth cutter.

Left: Norwalk Juicer 290

Right: PURE Juicer

The larger PURE press chamber with the central side post allows for easier and more comfortable access and as well as a taller a deeper press chamber to work in. there are no corner posts to block access then placing pulp packs.

It also means you can press three pulp packs instead of just two and press up to 50% more juice in one squeeze.

Left: Norwalk Juicer 290

Right: PURE Juicer

Easy to recognize, a significant difference is that the PURE cutter comes with eight teeth instead of five to better cut your produce, especially greens. This will enhance your juicing experience by providing a smoother, and more efficient cut.

PURE cutters are now available in two styles

  1. #304 stainless steel straight tooth (same material as Norwalk)
  2. 440c surgical grade stainless steel cutter with serrated teeth, heat treated and hardened to Rc 55. Same as what is commonly used in surgeons scalpels and chefs knives. The benefit this PURE Cutter is that it rarely or never needs sharpening and if it does, send it in for free sharpening.




Left: Norwalk Juicer 290

Right: PURE Juicer

As you can see right away, there is a big difference in size. Not only is the PURE Juicer tray deeper, 7" vs 6", but the press chamber that the pulp packs are pressed in is 1/2" taller as well.

In total there is almost 50% more volume in the PURE press chamber allowing you to process 1500 ml of pulp or slightly more than 1 liter of juice with each squeeze.

Left: Norwalk Juicer 290

Right: PURE Juicer

Another example for thought-through design are the grids.

Each PURE grid is made individually (not cut from a big sheet). This process enables us to number every grid for easy identification and makes for a smooth sided shape with no sharp edges. It increases the ‘open area’ of the grid from 61% to 75% deducing clogging and allowing pulp to flow through the greg without overheating.

What this means to you is an easy to identify, user-friendly grid that requires less push force to triturate your produce.

To find out how attention to detail can make a big difference, check out our complete side-by-side comparison chart:

TWO-STAGE JUICER COMPARISON

 

Leave a comment